• The Protek CineWhoop has a longer flight experience and weighs less than the previous cineshoops! The new version of Protek35 has been released, we upgraded the frame to be compatible with DJI O3 air unit.

• iFlight was able to increase the speed and thrust by 50% compared to its 3-inch predecessor which gives a lot more room for a lot more fun; as a result, the ProTek35 is equipped with the Butter Smooth 2205 2300KV Motors. It also features the DJI O3 air unit, BLITZ whoop F7 AIO, 55A 2-6S ESC, Nazgul 3535 propellers, and more!

Highlights

• No Props or frame in view!

• DJI O3 HD Air Unit Low-Latency digital transmission

• Secured Battery Plug and CNC bracket - Easy to install battery straps

• High-performance True-AIO Board BLITZ F7 AIO 55A to save weight and space

• T700 Quality Carbon - 40% more tensile strength compared to common 3K carbon

• Lightweight one-piece frame design - Less flexibility, more Rigid, more Durable

• Low Resonance frame construction - Less Jello, more Cinematic footage

Specifications

• Product Name: ProTek35 V1.4 O3 6S HD

• AIO: BLITZ Whoop F7 AIO

• Video Transmission: DJI O3 Air Unit 

• Frame: 151mm wheelbase

• Motor: XING 2205 2300KV motors

• Prop: Nazgul 3535 propellers

• Weight: 363±5g

• Takeoff Weight: Approx.588±5g (With 6S 1400mAh)

• Dimensions (L×W×H): 217×194×32.5 mm

• Max Speed: 140 Km/h

• Maximum Takeoff Altitude: 5000 m

• Max Hover Time: Approx. 6 mins（With 1400 battery no load）

• Max Wind Speed Resistance: Level 4

• Operating Temperature Range: -10° to 40° C (14° to 104° F)

• Antennas: Single Antenna

• GNSS: N/A

Video Transmission

• Product Name: DJI O3 Air Unit

• Weight: Approx. 36.4 grams（headband included）

• Communication Bandwidth： Max 40 MHz

• FOV (single screen): 155°

• Communication Frequency：2.400-2.4835 GHz (RX only)  /  5.725-5.850 GHz (RX and TX)

• End-to-End Latency

With DJI FPV Goggles V2:

• 810p/120fps Video Transmission Quality: The latency is lower than 28 ms.

• 810p/60fps Video Transmission Quality: The latency is lower than 40 ms.

With DJI Goggles 2:

• 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.

• 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.

• Max Video Transmission Bitrate: 50 Mbps

• Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC)

• Operating Temperature Range: -10º to 40º C (14° to 104° F)

• Power Input: 7.4-26.4 V 

• Audio Transmission: N/A

Packing List：

• 1 x ProTek35 V1.4 O3 6S BNF

• 1 x 3.5 inch prop (2 pairs)

• 2 x Battery pad

• 1 x Battery strap

Pre-tuned&Pre-setup

• Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

• To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

• Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

• Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"
  

Note

1. iFlight products may be used for civilian purposes only and any direct or indirect use of iFlight products for or in connection with the following is prohibited:

(1)Any military combat purpose or military combat related use;  

(2)Terrorist activities: The purchaser also shall require its customers or end users to comply with the foregoing requirements.

2. If party A has violated applicable export control or economic sanctions laws and regulations, Party B has the right to immediately suspend delivery of products to Party A or terminate relevant cooperation without any liability.